Filter
Top Products
Problem Possible cause Remedy
The indicator light "In
-
let/Drain" lights up and
flashes alternately.
The stopcock is closed. Open the stopcock fully.
The water inlet filter is
blocked.
Before rectifying the prob
-
lem you must:
–
Turn the programme
selector to the "Stop"
position.
–
Switch the dishwasher
off using the "On/Off"
button.
then:
–
Clean the water inlet fil
-
ter, see "Solving prob
-
lems".
The Waterproof system
has reacted.
Call the Miele Service De-
partment.
The indicator light "In-
let/Drain" lights up dur-
ing the "Energy save"
programme.
The intake water has not
reached the required tem-
perature of 45 °C, the hot
water system may be
overloaded (see
"Programme selection").
– Start the programme
again.
– If the indicator light co-
mes on again select a
different programme.
Problem solving guide
48