Filter
Top Products
Interrupting a programme
A programme is interrupted as soon as
the door is opened.
If the door is closed again, the
programme will continue from the point
it was at before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before clos
-
ing the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly making
sure that it clicks into place.
Changing a programme
Important:
If the detergent dispenser flap has
already opened, do not change the
programme.
If a programme has already started and
you wish to change it proceed as fol
-
lows:
^
Turn the programme selector (17) to
the “Stop” position.
^
Leave the programme selector (17) in
this position for at least one second.
^ Then turn the programme selector
(17) to the programme you wish to
use.
^ Select additional function “Delay
Start” or “Top Solo” again if wished
(see “Additional functions”).
^ Press the “Start” button (20).
The programme cycle begins.
Operation
35