Filter
Top Products
When first connecting the appliance to
the power supply and after a power
failure, the fan will run and a display
test will be carried out for
approx. 10 seconds. The appliance
cannot be used during this time.
Clean the appliance
^
Remove any protective wrapping.
^
Remove the non-slip mat and clean
with a solution of warm water and
liquid dish soap. Dry with a soft cloth.
^
Clean the warming drawer, inside
and out, with a damp cloth and wipe
dry.
^ Replace the non/slip mat once has
completely dried.
Heat the appliance
Heat the warming drawer for a
minimum of 2 hours.
^
Turn on with the "On/Off" touch
control
^
Tap the "Menu" touch control until the
2 symbol lights.
^
Tap the "Temp." touch control until
the 5
th
indicator lights.
^
Tap the "Timer" touch control until 2h
lights up.
^
Close the drawer.
The warming drawer is fitted with a
self-closing device.
The drawer is also fitted with a
contact switch which will only allow
the heating and fan to work if the
drawer is closed.
^ Vent the room when heating the
drawer for the first time.
Metal components have a protective
coating which may give off a slight odor
the first time your new appliance is
heated. The smell will dissipate after a
short time and does not indicate a
faulty connection.
^
The warming drawer will turn off
automatically after 2 hours.
Before the first use
10