Miele ESW 47x2 Food Warmer User Manual


 
^
Remove the cable tie from the panel.
^
Screw the removed panel to the custom panel (see
illustration).
^ Hook the panel into the bottom. Make sure the seal is
seated correctly.
^
Replace and slightly tighten the screws on the inside of the
drawer front.
^
Align the front.
^
Tighten the screws on the inside of the drawer front.
^
Replace the control panel, use caution with the power cord.
^
Replace and tighten the screws on to the left and right side
of the drawer front.
Installation
35