Miele FN 12827 S Refrigerator User Manual


 
^
Remove covers b at the top.
Attaching the connecting plate will align
the appliances in height and depth. If
one of the appliances is higher than the
other, start with the higher appliance:
^ Loosely screw connecting plate c to
one of the appliances using two
screws d.
^ Push connecting plate c until the
middle ridge of the plate touches the
side of the appliance.
^ Now tighten both screws d.
^
Secure connecting plate c to the
other appliance. To do this push the
appliances together or apart a little,
as necessary.
^
Remove the two covers e from the
bottom of the appliances.
^
Remove screw f, if present. This
screw is no longer required.
Installing in a side-by-side combination
37