Miele FN 12827 S Refrigerator User Manual


 
To avoid a build-up of condensation
and resultant damage, refrigerators and
freezers should not normally be
installed side-by-side.
However, this appliance has side wall
heating, and can be installed
side-by-side with certain other Miele
appliances.
Your dealer will be able to advise you
on which models are suitable.
Installing the appliances
Two people are needed to install the
appliances side-by-side.
Warning. Risk of damage when
moving the appliances once they
have been joined together as they
are very heavy.
Moving them incorrectly can cause
dents. Carefully observe the
instructions on how to move the
appliances.
^
The freezer or fridge-freezer must be
installed to the left of any refrigerator
when viewed from the front. The side
wall heating in the right-hand wall of
the freezer or fridge-freezer is
insulated to prevent the build-up of
condensation between the two
appliances.
^
To move the appliances always hold
them by the outer front corners.
^
Place the two appliances as close as
possible to their final position so that
they can be aligned for any
unevenness in the floor. The back of
the appliances still needs to be kept
accessible to complete the installation.
Instructions for moving the
appliances once they have been
joined
^
Push the left and then the right
corners alternately.
If the joined appliances are directly
in front of the niche:
^ Carefully push the two appliances
back into their final position.
If the joined appliances have to be
taken out of their niche:
^
Hold the bottom third section and pull
the appliances straight forwards.
Installing in a side-by-side combination
35