Filter
Top Products
Buzzer
A signal sounds at the end of a
program and when a fault occurs.
The buzzer at the end of a program
sounds four times in intervals with a
brief break in between.
The buzzer for a fault sounds four times
without pausing.
The buzzer is activated by default.
It can be turned off, so it does not
sound at the end of a program. The
buzzer for a fault cannot be turned off.
^ Open the door.
^ Turn the dishwasher off with the V
button.
^ Press and hold the Program button
and turn the dishwasher on
simultaneously using the K button.
Keep the program button pressed for
at least four seconds until the lower
right program indicator lights up.
If it does not come on, start over.
^
Press the Program button four times
briefly.
The "Intake/Drain indicator flashes 4
times at short intervals.
The sequence of flashing by the upper
right program indicator shows whether
the program end buzzer is turned on or
off:
–
upper right program indicator
flashing: buzzer is turned on
–
upper right program indicator is off:
buzzer is turned off
^ To change the setting press the
"Program" button (for at least one
second) until the "Intake/Drain"
indicator lights up.
^ Now press the Program button
briefly.
The setting is saved immediately.
^ Turn the dishwasher off with the V
button.
Additional options
36