Filter
Top Products
Poor cleaning results
Problem Possible fault Solution
The dishes are not
clean.
The dishes were not loaded
correctly.
See "Loading the
dishwasher".
The program was not
powerful enough.
Select a more intensive
program (see "Program
Guide").
Not enough detergent was
dispensed.
Use more detergent, or
change the detergent.
The spray arms are blocked. Turn the spray arms and
rearrange the dishes if
necessary.
The triple filter in the wash
cabinet is clogged or not
correctly inserted.
The spray arm jets might be
clogged as a result.
Clean the filter and insert it
correctly.
Clean the spray arm jets, if
required (see "Cleaning and
care").
The non-return valve is stuck
open and blocked. Wash
water will run back into the
wash cabinet.
Clean the drain pump and
the non-return valve (see
"Cleaning and care").
Glasses and
cutlery show
streaks. There is a
bluish sheen on the
surface of glasses
and a film which
can be wiped off.
The rinse aid dosage is set
too high.
Reduce the dosage (see
"Rinse aid").
Frequently Asked Questions
42