Filter
Top Products
Faults in the water intake/water drain
Problem Possible fault Solution
The dishwasher
stops shortly after
the program starts.
The buzzer sounds.
The "Intake/Drain"
indicator flashes and
lights up alternately
when the door is
open.
The water supply valve
is closed.
–
Open the water supply valve
all the way.
The dishwasher has
stopped.
The buzzer sounds.
The "Intake/Drain"
indicator flashes
when the door is
open.
Before fixing the fault:
– Turn the dishwasher off with
the V button.
Fault in the water intake. – Open the water supply valve
all the way.
– Clean the water intake filter
(see "Cleaning and Care").
– The water pressure at the
water connection is less than
30 kPa (0.3 bar/4.35 psi).
Consult a plumber.
Fault in the water drain.
There might be water in
the wash cabinet.
–
Clean the triple filter (see
"Cleaning and care").
–
Clean the drain pump (see
"Cleaning and Care").
–
Clean the non-return valve
(see "Cleaning and Care").
–
Remove any kinks in the
drain hose.
Frequently Asked Questions
39