Filter
Top Products
40
LWM Module C conductivity meter
• For E 310/E 318 water demineralisation
cartridges
• H 118, W 235, D 110 mm
• Electrical connection AC 230 V 50 Hz
• 2 hoses, approx. 1.9 m,
3⁄4" threaded union
• Integrated conductivity meter
0–20 µS/cm
1.5 µS/cm = Tri-distilled water
2.5 µS/cm = Bi-distilled water
20.0 µS/cm = Single-distilled water
Accessories for reprocessing
with fully demineralised water
G 7895/1 Aqua Purificator
• For use on G 7883 and G 7893
• Housing unit for two E 310 or E 318 dem-
ineralisation cartridges
• Integrated conductivity meter
• Generally recommended quality for the
final rinse < 15 µS/cm
• H 850 (820), W 300, D 600 mm
• Freestanding unit, can be built under
• Outer panelling in stainless steel or white
• Electrical connection AC 230 V 50 Hz
• Water connection:
1 x cold water, 3⁄4" threaded union
for connection of cartridge (hose approx.
1.2 m long)
1 x connection of cartridge to machine with
3⁄4" threaded union (approx. 1.2 m long),
2.5–10 bar flow pressure to cartridge
(pressure loss approx. 1 bar per cartridge)
E 310 water demineralisation cartridge,
pre-charged
• Pressure-proof stainless-steel cartridge
• H 570, Ø 240 mm
• Complete with vent and pressure relief
valve
• Contains 20 l of reusable mixed resin
Delivery capacity in litres depends on the
salt content of the raw water and the max.
acceptable conductivity.
Conductivity levels
5 µS/cm 10 µS/cm
5°dH 4250 4500
10° dH 2125 2250
15°dH 1420 1500
20°dH 1070 1125
25°dH 850 950
30°dH 710 750
The information given in this chart is
intended only as a guide.
E 318 water demineralisation cartridge,
empty
• Charged with 20 l of single-use resin
E 315 disposable resin
• 20 l homogenous, mixed-bed resins for
E 318
• Box with two 10 l bags, vacuum-packed
in plastic sacks
• Replacement filter bag
E 316 refill set
• Plastic barrel with lid and funnel
• For 30 l disposable resin