Filter
Top Products
7
G 7883, G 7893, G 7883 CD
washer-disinfectors
G 7883 washer-disinfector
• H 850 (820), W 600, D 600 mm
• MULTITRONIC Novo Plus controls with
10 programmes
• Convertible to single-phase connection
• Integrated dispenser pump for process
chemicals (neutralising agent)
• Capacity per batch: 39 narrow-necked
glasses or 116 pipettes or 1600 test
tubes
G 7893 washer-disinfector
• H 850 (820), W 600, D 600 mm
• MULTITRONIC Novo Plus controls with
10 programmes
• Integrated dispenser pump for process
chemicals (neutralising agent)
• Drying Plus: Integrated hot-air drying
• Throughput per batch:
37 narrow-necked glasses or 96 pipettes
or 1600 test tubes
G 7883 CD washer-disinfector
• H 820 (850), W 900, D 700 mm
• MULTITRONIC Novo Plus controls with
10 programmes
• 2 integrated dispenser pumps for
process chemicals (alkaline
detergent/neutralising agent)
• Drawer with 2 supply containers, 5 l each
• Integrated hot-air drying unit
• Throughput per batch:
37 narrow-necked glasses or 96 pipettes
or 1600 test tubes
• Optional version with oil- and grease-re-
sistant gaskets for use in petrochemical,
cosmetics and food-processing indus-
tries
NEW:
First 60 cm wide washer-disinfector with
integrated hot-air drying
Miele laboratory glassware washers
Miele lab washers are available both as
freestanding and built-under units. All
machines are complete with supply lead
(without plug), and water inlet and
drainage hoses._Baskets and inserts for
laboratory glassware are configured
individually for the glassware load in hand.
Further useful equipment, e.g. liquid
dispensers for detergents and surfactants,
are listed on Pages 38–42.
Hygiene, Safety, Efficiency
• Thorough cleaning and disinfection in a
closed-circuit system
• Glassware reprocessing for analytical
experiments
• Main wash/rinse cycle optionally with
fully demineralised water
• Reproducible results, validatable and
qualifiable processes
• Thermal disinfection
• Process documentation interface
(depends on model)
• Extensive safety features in accordance
with EN ISO 15883
• Connection option for liquid dispensing
systems
Technical data Page 44/45
Illustration shows machine with lid