Filter
Top Products
Installation work and repairs should
only be performed by a qualified
technician in accordance with all ap
-
plicable codes and standards. Re
-
pairs and other work by unqualified
persons could be dangerous and
the manufacturer will not be held re
-
sponsible.
Before connecting the appliance to
the power supply make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult a quali-
fied electrician if in doubt.
CAUTION: Before servicing, discon-
nect the power supply by either re-
moving the fuse, unplugging the unit
or manually "tripping" the circuit
breaker.
Installer:
Please leave these instructions with
the consumer.
Power supply
The oven is equipped with a 6 ft./1.8 m
flexible power cord consisting of 4
wires ready for connection to a dedi
-
cated 3 pole, 4 wire grounding power
supply:
–
120/240 V, 60 Hz, 20 A
or
–
120/208 V, 60 Hz, 20 A
Black wire: connect to L1 (hot), 20 A
Red wire: connect to L2 (hot), 20 A
White wire: connect to N (neutral)
Green wire: connect to GND (ground)
A dedicated line and junction box
should be used to connect the oven to
a 20 A circuit.
Connection details are also given on
the diagram located on the top of the
oven.
Electrical connection
61