Filter
Top Products
You can save settings you use
frequently as user programmes. You
can choose your own names for these
programmes and then call them up
whenever you want. You can also enter
these programmes into the main menu.
^
Select "User Programmes" from the
main menu.
If you have not yet saved any User
programmes, follow the on-screen
instructions for creating a new User
programme. The steps are the same
as those given under "To create a
user programme" below.
If you have already saved a User
programme, you will be offered the
following options:
ß Select
This is used to call up and start an
existing User programme.
ß Create
This is used to create a new User
programme.
ß Change
Existing programmes can be altered.
ß Delete
Existing programmes can be deleted.
To create a User programme
^
Select "User Programmes" from the
main menu and then the "Create"
option. Then select the function you
want.
^
Confirm the selection of, for example,
"Fan plus".
^
If necessary, alter the recommended
temperature.
^
Select a duration or a core
temperature if using the roast probe
and confirm.
^ Check the settings and confirm them
with "Continue".
^ If you are not using the roast probe
then you can add one more
programme step.
For example, to set the oven to start
another function immediately after the
first one.
The procedure is the same as
described above.
^
You can also set the shelf level to be
used.
After confirming with "Continue" you can
either choose one of the existing
programme names or set your own
user programme name. To do this:
^
Select the letters or numbers by
touching the sensors beside the
arrows.
User programmes
32