Filter
Top Products
Timer - use
Programming cooking time
With the timer it is possible for the oven
and both the front hob cooking zones
to be switched off automatically, or set
to come on at a later time and then also
be switched off.
The oven, the left and right front hob
cooking zones can be programmed in-
dependently of each other.
Programming cooking time in the
oven
Use the oven function selector to
choose a setting.
The indicator light in the centre of the
“ - /+” button lights up.
Enter the times for the automatic
cooking process, (see appropriate
section below).
When a cooking process is pre-se-
lected, the setting chosen and the sym-
bol p are displayed, as well as the time
of day and the symbols for the time en-
tered.
During a process the temperature is
shown in the oven display. The time of
day continues to be shown.
Shortly before the end of cooking time
the oven heating switches off automati-
cally.
The Energy-save function (as de-
scribed under “Ovens - Use”) comes
into action.
“EC” now appears in the oven display
instead of the actual oven temperature.
The oven temperature will switch on
again if:
– the oven temperature is altered.
– the cooking time is lengthened signi-
ficantly.
When the end of cooking time has
been reached
– an audible tone sounds for approx. 5
seconds,
– and at the same time the “)” sym-
bol flashes.
If the audible tonel is not switched off it
will continue to sound at 5 minute inter-
vals as a reminder that cooking has fin-
ished. This reminder continues for up
to an hour.
Both the audible tone and the visual
display can be cancelled by:
– Pressing the “)” button.
If the food is not sufficiently cooked
to your taste, a further cooking time
can be entered.
– Turning the oven function selector to
“0”.
28