Filter
Top Products
Correcting minor faults
If “F7”, appears in the display, this
may mean that the cooling fan has
stopped turning.
The Service dept must be called to
put this right. Please quote the fault
message.
If “F8”, appears in the display, this
may mean that the Fan Heat fan has
stopped turning.
The Service dept must be called to
put this right. Please quote the fault
message.
If “F9”, appears in the display, this
may mean that the maximum tem-
perature of the appliance has been
exceeded.
The appliance switches itself off auto-
matically. As soon as the tempera-
ture has fallen to an acceptable level
the fault message disappears. The
appliance switches itself on again
automatically.
If this fault message occurs repeatedly,
please inform the Service dept.
Please quote the fault message.
If any other fault message appears
in the display, this will need a service
visit. Please quote the fault message.
. . . the timer display is dark when
the appliance is first switched on.
This is not a fault.
If the time of day has been switched
off, the display stays dark.
If the “f” and “)” buttons are
pressed at the same time “12:00” ap-
pears in the display field.
. . . the time of day cannot be entered
after a power cut.
This is not a fault.
Check whether the oven function selec-
tor was still set to one of the functions.
If it was, turn it to “0”.
The time of day can now be entered.
. . . The residual time indicator is not
activated when cooking with the
roast probe;
the energy-save function is not acti-
vated when cooking with the roast
probe or the timer.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling residual
time or the energy-save function comes
into operation. Sometimes these do not
occur.
64