Cleaning and care
To make cleaning easier you can
– remove the oven door,
– take out the telescopic carriage or
the runners,
– take out the back panel
– lower the top heating element.
To remove the oven door
Please note : the oven door is
heavy. It should be gripped firmly at
the sides when being removed or re-
fitted.
Open the door fully.
Before the door can be removed,
the door hinges need to be locked
so that they do not damage the
door when it is taken out.
Flip down the locking clamps on
each door hinge. This locks the
hinges.
Almost shut the door then lift it up
until the hinges disengage. Remove
the door.
To re-fit the oven door
Hold the door as shown above and
carefully put the locked hinges into
the guide holes until they engage.
Open the door fully.
Still supporting the door, flip the lock-
ing clamps up.
It is essential that the locking
clamps are flipped up when the
door is re-fitted after cleaning.
Otherwise on closing the door, the
hinges could work loose from the
guide holes and this could result in
damage to the door.
Cleaning and care
60