Filter
Top Products
Changing the status of a
setting
^
Select "Settings".
"PI" appears in the display.
The settings "PI"to"P7" can be
changed individually (see table).
^
Continue touching the "V"or"W"
control until the desired setting
number appears in the display.
^ Touch the "OK" control.
The current status of the setting "S"
(example) appears in the display.
^
Use the "V"or"W" control to change
the setting status (see table).
^
Touch the "OK" control to confirm.
The status change is stored in memory.
"P" and the number of the setting
appear again in the display.
Other settings can also be changed at
this time as long as the function
selector is not turned to "Off".
The settings will remain saved in the
case of a power failure.
PI
S0
Settings
15