Miele H 4746 BP Oven User Manual


 
If desired, you can set a finish time for
the "Self Clean" process during the
first five minutes after starting the
program. To do this:
^
Call up the "S" symbol and use the
temperature selector or the "W"
control to change the end time.
You can change the end time if you
wish at any time up until the program
starts.
At the end of the "Self Cleaning"
process
–"PYE" will appear in the display.
the "S" symbol will start flashing.
a buzzer will sound, if it is switched
on (see "Settings").
^ Turn the function selector to "Off".
The buzzer will stop and the symbols in
the display will go out.
^
Once the oven has cooled, remove
the ash with a damp sponge.
Avoid cleaning the gasket around
the interior (sealing the door glass
pane).
It is made from glass fiber and will
get damaged if rubbed or scrubbed.
A film may build up on the oven door.
This can be removed with a shielded
blade scraper or a non-abrasive
sponge and a mild solution of warm
water and dish soap.
The "SELF CLEAN" function will stop,
if the function selector is turned
to "0ff".
if another function is selected
during the "Self Cleaning"
process "PY" and "0" will appear
in the display.
if there is a power failure.
"PY" and "0" will appear in the
display.
Turn the function selector to "0ff"
The oven door will remain locked
until the oven temperature has fallen
below 535 °F (280 °C).
Self Cleaning
51