Filter
Top Products
Entering a duration and a finish time
You can programme the oven to switch
on and off automatically by entering a
duration and a finish time.
For example:
The time now is 10:45;
you want a dish with a cooking duration
of 90 minutes to be ready at 13:30.
^
Place the food in the oven.
^
Select the required function and set
the temperature.
The oven heating, lighting and cooling
fan will switch on.
First enter the cooking duration:
^ Touch the OK sensor repeatedly until
the T symbol starts to flash in the
display.
0k00 will appear in the display.
i
T
30
ß
^
Whilst the T is flashing, enter the
duration in hours:minutes (1:30)
using the ; sensor.
Now enter the finish time:
^
Touch the OK sensor.
S
i2
T
i5
ß
The following appears in the display:
–
i2ki5"
(time of day plus duration:
10:45 + 1:30 = 12:15).
–
The S symbol will flash.
S
I3
T
30
ß
^ Whilst the S is flashing, set the time
you want the programme to finish at
(13:30) with the ; sensor.
The oven heating, lighting and cooling
fan will switch off.
^ Touch the OK sensor.
Once the duration entered has been
accepted, the display will revert to
showing the time of day. The T and S
symbols indicate which of these has
been entered.
If a minute minder time has also been
entered, this will take precedence in the
display.
As soon as the start time (13:30 - 1:30
= 12:00) is reached, the oven heating,
lighting and cooling fan will switch on.
Operation
26