Filter
Top Products
Settings mode X
You can alter the brightness of the
display s in Settings mode.
Settings mode is represented in the
display by the Menu symbol X. The
following section describes how to
access Settings mode and alter
settings.
Altering the brightness of the display
The display brightness can be adjusted
to suit the lighting conditions of the
room.
There are five different display
brightness settings. The factory default
setting is 1.
^ Press the Super cool button for
approx. five seconds.
The Menu symbol X will light up,
settings mode is now activated. The
Brightness symbol s will start
flashing.
^
Press the Super cool button briefly to
confirm this.
The Brightness symbol s will light
up.
^
Press the Temperature button
repeatedly until the brightness level
required is reached.
The more areas of the temperature
display which light up, the brighter
the display.
To confirm the altered setting:
^ Press the Super cool button briefly.
The Brightness symbol s will flash.
The newly selected setting has been
saved.
To come out of Settings mode:
^
Press the On/Off button.
or
^
Wait for 5 minutes.
The Menu and Brightness symbols
will go out.
The temperature display will show
the required temperature.
Customising settings
14