Filter
Top Products
^ Unscrew upper hinge pin k using a
suitable spanner.
^ Using a flat-bladed screwdriver
remove covers l from the front.
^ Screw in upper hinge pin k on the
opposite side using a suitable
spanner.
^
Refit covers l from the back on the
opposite side, and then click them
into place at the front.
^
Remove caps m from the door
bearing bush in the door and refit on
the opposite side.
^
Using a screwdriver, remove spring
clamp n from underneath the door
and fit it on the opposite side.
^
Pull hinge pin e with washer o out
of the door bearing bush from below.
Important. The opening on washer
o must be placed over the tab on
hinge pin e so that washer o sits
correctly on hinge pin e.
^ Place hinge pin e with washer o in
the door bearing bush on the
opposite side. Important. The tab on
the pin must face the inside of the
door and the notch the outside.
Changing the door hinging
40