Filter
Top Products
Stainless steel appliances
–
Appliance door
The appliance door has a high quality,
special finish which is resistant to
soiling and is very easy to clean.
Do not use the following to
clean/condition the door
– stainless steel cleaning agent:
this will damage the surface.
– Miele stainless steel conditioning
agent:
this will cause noticeable smearing.
– Side panels
^ Use Miele stainless steel conditioning
agent to remove any soiling.
^ Make sure you treat the side panels
with Miele stainless steel conditioning
agent each time you clean them.
Unlike stainless steel cleaning
agents, the conditioning agent does
not contain any abrasive substances.
It will give them a water and dirt
repellent protective coating and help
prevent re-soiling.
Ventilation gaps
^
The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
^
The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
Metal grille at the back of the
appliance
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
After cleaning
^
Push the dividing plate in until it
clicks into place.
^
Replace all shelves and accessories
in the appliance.
^
Reconnect to the mains and switch
the appliance back on.
^
Switch on the Super cool function for
a while so that the appliance can
cool down quickly.
^
Place food back in the appliance and
close the door.
Cleaning and care
35