Filter
Top Products
^
Now touch the X sensor repeatedly
until † appears in the display.
^
Touch the access sensor again.
^
By touching the X sensor, you can
now set the temperature to be
displayed in Fahrenheit or Celsius.
†0: Temperature in Fahrenheit
†1: Temperature in Celsius
† –: Return to menu
^ After selecting a new setting, touch
the access sensor to confirm your
choice.
^ Now touch the X sensor repeatedly
until c appears in the display.
^ Touch the access sensor again.
You have now left settings mode.
The door alarm is automatically
disabled when the appliance is in
settings mode. As soon as the door
is closed, the door alarm is activated
again.
Temperature display
The temperature display on the
control panel always shows the
required temperature.
The temperature display will flash if
–
a different temperature is being set,
–
the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness is no cause for
concern if it is due to the door being left
open for a while, e.g. for removing or
storing a large amount of food.
The correct temperature
20