Filter
Top Products
^
Fit hinge pin i into middle hinge
plate k in the lower door.
Replacing the lower soft-close door
mechanism
^
Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^
Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^ Using a flat-headed screwdriver,
slide the soft-close mechanism back
into the door as far as it will go
towards the appliance so that it clicks
into position.
The screw holes on the left and right
must line up perfectly.
^
First screw the soft-close mechanism
onto the appliance side, then onto
the handle side c, pushing it firmly
towards the appliance.
Changing the door hinging
67