Filter
Top Products
Replacing the upper soft-close door
mechanism
^
Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^
Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^
Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
The screw holes on the left and right
must line up perfectly.
^
First screw the soft-close mechanism
onto the appliance side, then onto
the handle side c, pushing it firmly
towards the appliance.
^
Attach panel b to soft-close
mechanism bracket d.
^
Push cover e on from the side so
that the openings for the pin f are
vertically aligned.
^
Align bracket d to the hinge plate,
and insert pin f from above so that
the right angle fits into the recess.
Changing the door hinging
69