Filter
Top Products
* The appliance depth is increased
by approx. 35 mm for appliances
with wall spacers fitted.
a Top box
b Appliance
c Housing unit
d Wall
The appliance can be installed in a
kitchen run. To match the height of the
rest of the kitchen, the appliance can
be fitted with a suitable top box a.
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance across the entire width of the
top box for air to circulate.
The cross section of the air outlet under
the room ceiling must be at least
300 cm
2
to ensure that air can circulate
without hindrance. Otherwise the
compressor has to work harder,
resulting in an increase in electricity
consumption.
The ventilation gaps must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When built into a kitchen run (max.
housing unit depth 580 mm) the
appliance can be installed directly next
to the furniture housing unit. The
appliance door will protrude in front of
furniture fronts at the sides by 34 mm*
and by 55 mm* in the middle of the
doors. This enables the doors to be
opened without hindrance.
When installed next to a wall d a
distance of approx. 55 mm must be
maintained on the hinge side between
the wall d and the appliance b,so
that the doors and the handles have
sufficient space for opening.
Installation
73