Filter
Top Products
Automatic switch-off
Use this function to turn a burner off
automatically.
The automatic switch-off can be used
for several burners at the same time.
^
Turn the desired burner on and
select a power level.
^
Select the m touch control until the
indicator light for that burner flashes.
If more than one burner is turned on,
the indicator will light up clockwise from
front left to front right with each touch of
the m control.
^ Touch the - or + sensor until the
desired time is displayed, e.g. 15
minutes.
The set time counts down in minutes in
the timer display. The remaining time is
displayed and can be changed at any
time by pressing - or +.
Setting an additional burner
If you would like to set another burner
to switch-off automatically, repeat the
above steps.
If several different switch-off times are
programmed, the shortest remaining
time is shown in the display, and the
indicator light for that burner will flash.
The other indicator lights will show a
steady light.
If you would like to see the other
remaining times:
^
Select the m touch control until the
indicator light of the desired burner
flashes.
Timer
27