Filter
Top Products
Water trough
^
Let the water cool to a safe temper-
ature to prevent burns.
^
Place a container of a suitable size (a
metal pot for example) under the
drain valve. Slowly open the drain
valve, f, by turning it
counterclockwise, a.
^
Close the valve after all the water has
drained by turning the valve
clockwise, b, until the valve can turn
no further (do not over-tighten or jam
the valve).
Make sure that the underside of the
grill is left accessible for draining the
water. Wait until the water has
cooled down before draining to
prevent scalds.
^
Remove or wipe clean any residues
remaining in the reservoir. The
heating element can be raised to
make this easier.
^
Fill the water trough with a mild
solution of liquid dish soap and warm
water, and rinse it out thoroughly.
^
Drain off the solution, rinse with clean
warm water and dry.
Do not use stainless steel
conditioner on the water trough.
Cleaning and care
14