Filter
Top Products
Programming Table
Program* Status** Setting
P0Demonstration mode and
factory default settings
S 0 Demonstration mode on
S1 Demonstration mode off
S 9 Restore Factory default settings
P1Stop and Go S0 Off
S1 On
P2Power level range S0 9 power levels
(1 to 9)
S 1 17 power levels
(1, 1., 2, 2., 3 ... to 9)
If the Auto heat setting is
selected, an A will flash
alternately with the continued
power level in the display
P3Warning tone when there
is no pan or the pan is
unsuitable
S 0 Off
S 1 Quiet
S2 Medium
S 3 Loud
P4Keypad tone when a
control is touched
S 0 Off
S 1 Quiet
S2 Medium
S 3 Loud
P5Timer tone volume S 0 Off
S 1 Quiet - 10 seconds
S2 Medium- 10 seconds
S
3
Loud - 10 seconds
* Programs / status not shown are not allocated.
** The factory default setting is printed in bold.
Programming
33