Miele KM 6366 Cooktop User Manual


 
Stop and Go
Your appliance has a Stop and Go feature which, when
activated, reduces the power of all cooking zones in use to
power level 1. When Stop and Go is activated, the cooking
zone power levels and the setting of the timer cannot be
altered and the hob can only be switched off.
When Stop and Go is deactivated the cooking zones resume
at the power level which was last set and any programmed
times will continue to run.
If the function is not deactivated within 10 minutes, the hob
will switch off.
Activating/deactivating
^ Touch the sensor.
Recall
If the hob is accidentally switched off during use, you can
restore all settings using this function. The hob must be
switched on again within 6 seconds.
^ Switch the hob back on.
^ Touch the sensor within 6 seconds of switching back
on.
Additional functions
35