Filter
Top Products
The appliance must only be installed
and connected to the electricity
supply by a suitably qualified and
competent person in strict
accordance with current national
and local safety regulations.
Fit the wall units and extractor hood
before fitting the hob to avoid
damaging the appliance.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
This appliance must not be installed
over a fridge, fridge-freezer, freezer,
dishwasher, washing machine,
washer-dryer or tumble dryer.
~
This hob must not be installed
above ovens or cookers unless these
have a built-in cooling down fan.
~
After installation, ensure that the
connection cable is without hindrance
and that there is no mechanical
obstruction which could damage it.
All dimensions in this instruction booklet
are given in mm.
Safety instructions for installation
45