Filter
Top Products
Switching off
^
Press the rocker switch.
The cooling system and the interior
lighting are now switched off.
Further settings
You can select further settings in the
settings mode and you can also select
certain appliance functions via the
control panel and adjust the settings.
The settings for the different functions
are described in more detail in the
relevant section of these instructions.
Overview of functions that can be
selected in settings mode:
Function Symbol
To enter or leave settings
mode
;
To select the
temperature unit
(see "The ideal temperature
and humidity level")
†
No function selected ;
To switch the sensor tone
on/off (see "Switching on
and off")
=
To set the humidity level
(see "The ideal temperature
and humidity level")
§
Switching the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^
Touch the access sensor so that it is
highlighted in yellow.
^ Touch the sensor for one of the zones
(it does not matter which) so that it is
highlighted in yellow.
^ Take note of the position of the X
sensor (but do not touch it!).
^ Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.
^ Place your finger in the position of the
X sensor, and leave it there.
^
At the same time, briefly touch the
access sensor (without moving your
finger from the X sensor).
Switching on and off
14