Miele KWT 1601 Vi Refrigerator User Manual


 
Aligning the appliance
^
Align the appliance with
neighbouring furniture fronts.
The installation aids e on the
appliance door are suitable for 19 mm
or 38 mm furniture door fronts.
The adjustable feet at the front and
back of the appliance can be adjusted
from the front.
Front feet:
Adjust from the top with a
8 mm socket wrench f.
Rear feet:
Adjust with a (cordless) screwdriver
or 8 mm socket wrench g.
^
Place a spirit level on the installation
aids e on the appliance door to
check the appliance's alignment.
Important:
work methodically when adjusting
the feet: always alternately left, right,
etc.
^
A mark is located on the appliance
base. When adjusting the height, this
mark needs to be aligned at 32 mm
from the floor. Unscrew the feet until
the mark on the base has reached 32
mm. The 32 mm mark is for aligning
the appliance in a niche height of
2134 mm.
Important:
Adjust the feet only until the
marking on the base has reached
the 62 mm point (max. niche height
2164 mm).
Otherwise the rear foot adjustment
mechanism will get damaged.
^
Check the alignment of the appliance
again using the spirit level.
Installation
52