ERV-7LGH-F-RX3-E (Feb. 2009)
Lossnay ERV
LGH-F-RX3-E
Performance Certied
to ARI 1060 Standard
Outdoor Air (OA)
Air drawn from outdoors - ventilation air.
Pulse Input
When the control signal
from an external device
outputs a pulse such as
the one shown at right,
the pulse input control
is performed by the Lossnay
®
unit. (Optional DIP
switch 2-2 ON) 200 ms or more.
Remote Operation
This is used for enabling/disabling the On/Off con-
trol signal from an external device and for setting
interlocked operation of the external device and the
Lossnay unit.
ON/OFF interlock: Enables both ON OFF and
OFF ON external signals.
ON interlock: Enables OFF ON external signal.
Disables ON OFF external signal.
OFF interlock: Enables ON OFF external sig-
nal. Disables OFF ON external signal.
External priority: Same as on/off interlock but the
OFF signal from the remote controller is ignored
when the external control signal is on.
Return Air (RA)
Air drawn from indoor space.
Supply Air (SA)
Air supplied to indoor space.
Ventilation Modes
Energy Recovery – energy exchange through
Lossnay
®
core at all times.
Bypass – no exchange – bypass damper open.
Automatic – energy exchange or bypass as
determined by present temperature sensor in inlet
and discharge airstreams.
Balanced Ventilation
A ventiliation strategy using both an exhaust air
blower and a supply or make-up air blower provid-
ing the same airow and pressure so as not to
pressurize or depressurize a building.
CFM
Cubic Feet per Minute, a measure of air volume.
Delayed Operation
The On/Off operation of the Lossnay
®
unit can
be delayed for 30 minutes following the opera-
tion of the indoor unit. When using PZ-41SLB-E,
the delay can be set for 10, 20, 30, 40, 50 and 60
minutes.
ESP
External static pressure, available motive force
to propel air in a duct system from a blower or
ventilator.
Enthalpy Exchange
The exchange of both sensible and latent heat
energy.
Exhaust Air (EA)
Air expelled from indoor space.
External Control Input
An On/Off input signal for operating the Lossnay
®
unit that can be sent from an external device. The
signal may be a 12V-24V DC or an uncharged
a-contact signal.
Interlocked Lossnay
®
Lossnay
®
unit linked to CITY MULTI
®
or Mr. Slim
®
indoor units that receive signals and operates via
the indoor unit’s remote controller.
Non-interlocked Lossnay
®
Lossnay unit controlled independently of
CITY MULTI
®
or Mr. Slim
®
indoor units by the
Lossnay
®
remote controller and/or centralized
controller.
200 ms or more
2.8. Energy Recovery Ventilation Terminology