Filter
Top Products
24
Flame adjustment
Oven burners
The burner is correctly adjusted when the
flame is stable, silent and goes out without
any noise.
• When the flames are too short, the
nozzle is whistling or the flames have the
tendency to detach from the burner, it
means that there is too much air in the
valve. If there is too much air there is a
risk that the flames will extinguish.
• But, if the flames are too long, soft,
lighting, there is not enough air in the
valves. These flames discolour the
bottom of pans.
• Loosen the screw M which fixing the air
adjuster A;
• Move the air adjuster A forward or
backward until achieving the right mixture
(see table no. 2);
• Tighten the fixing screw M.
Grill burner
• Loosen the screw fixing the Venturi.
• Move the adjusting collar left or right until
achieving the correct flame picture (see
table no. 2).
Tighten the fixing screw.
M
A
air adjusting
a
djusting collar screw
opening