Mr. Coffee ECMP2 Espresso Maker User Manual


 
4.
lnsert
the
filter holder
into the brew head and place a mug
on the
drip
tray. Do not
fill
filter holder
with
coffee.
5. Plug
the
machine into the electrical
outlet
and turn
the on/off
switch
ON.
6.
Place a cup with cold water under
the
steam nozzle.
Submerge the
tip
of the steam tube in
the
water. Slowly turn
the
selector control
knob to
the
On position. After a few seconds close
the
steam nozzle
by turning
the
selector control knob to the OFF
position.
This will
clean any residue left
in
the
nozzle
from frothing
milk.
Next
turn
the
brew switch to
the
CUP
position.
Vinegar will begin to
flow
through
the
filter. Let
this
process continue
until
the vinegar in
the
water
reservoir reaches the
minimum
line on
the
water reservoir.
7.
When
all
the
vinegar
has been pumped
out
to
the
minimum level of
the
water
reservoir,
turn the brew switch to the “0” OFF position
and
turn
the on/off switch to OFF. Allow
the
machine to cool.
Empty
the
remaining
vinegar from the water reservoir by
lifting
the
lid
and
removing the water reservoir. Pour the remaining vinegar down
your
sink.
8
Repeat
steps.
1-8
using
only tap water to rise any remaining traces of
vinegar
out
of the machine. Repeat
this
process twice, allowing
the
machine
to cool and pressure to be
released
before repeating.