SPECIAL CORD SET INSTRUCTIONS
1.
A short power supply cord is provided to reduce the hazards
resulting
from becoming entangled
in
or tripping over a longer cord.
2.
An
extension
cord may be purchased and used if care Is exercised in
Its use.
3.
If an
extension
cord is used, the marked electrical rating of the
exten-
sion cord must be at least
10
amps and 120 volts. The resulting
extended cord must be arranged so that It will not drape over
the
counter top or table top where It can be pulled on by children or
tripped over accidentally.
Note:
This appliance has a polarized
plug
(one blade
is
larger than the
other). As a safety feature,
this
plug
will
fit in a polarized bullet
only one way. If the plug does not fully fit in the outlet, reverse
the plug. If it
still
does not fit, contact a electrician. Do
not attempt to defeat this safety feature.
CAUTION:
1) Do not remove the filter holder at any
time
during
the brewing process.
2) Do not let the pump run with an empty water container.
This can damage the pump permanently.
3) Use caution removing the
filter
holder from the brew
head. The metal parts may
still
be very hot.
Also,
there
may be hot water floating on the top of the filter basket.
4) When using the frothing tube make sure the
tip
of the
tube is submerged In
liquid
before turning the steam
selector control knob to the “ON”
position.