PAGE 14 — STXD6i RIDE-ON TROWEL• OPERATION MANUAL — REV. #0 (03/23/12)
LIFTING AND TRANSPORTING
LIFTING THE TROWEL
When lifting trowel for moving or transporting, do the
following (see Figure 1).
Figure 1. Lifting the Trowel
1. Secure two lifting straps to the lift loops located on the
left and right side of the trowel.
2. To lift, insert forklift forks through loops at the end of
lifting straps.
NOTICE
Ensure forklift has adequate lifting capacity for lifting
the trowel.
TRANSPORTING THE TROWEL
After trowel has been lifted onto a flatbed truck, do the
following:
3. Attach suitable tie-down straps to the trowel. Route
tie-down straps on both sides as shown in Figure 2.
Figure 2. Routing Tie-down Straps
4. Secure the trowel to the flatbed with the two straps,
making sure they are properly tied, to prevent
movement of the trowel during transport.
LEFT