Filter
Top Products
µ
PD30500, 30500A, 30500B
12
Data Sheet U12031EJ3V0DS00
ELECTRICAL SPECIFICATIONS
(1)
µ
PD30500
Absolute Maximum Ratings
Parameter Symbol Condition Rating Unit
Supply voltage VDD –0.5 to +4.0 V
Input voltage
Note
VI –0.5 to VDD + 0.3 V
Pulse of less than 10 ns –1.5 to VDD + 0.3 V
Operating case temperature TC PGA package 0 to +70 °C
BGA package 0 to +85 °C
Storage temperature Tstg PGA package –65 to +150 °C
BGA package –40 to +125 °C
Note The upper limit of the input voltage (VDD + 0.3) is +4.0 V.
Cautions 1. Do not short circuit two or more outputs at the same time.
2. The quality of the product may be degraded if the absolute maximum rating of even one of
the above parameters is exceeded, even momentarily. Absolute maximum ratings, therefore,
specify the values which if exceeded may physically damage the product. Use the product
never exceeding these ratings.
The specifications and conditions shown in the following DC Characteristics and AC
Characteristics are the range within which the product can normally operate and the quality
can be guaranteed.
DC Characteristics (T
C = 0 to +70 °C (PGA Package), TC = 0 to +85 °C (BGA Package), VDD = 3.3 V ±5 %)
Parameter Symbol Condition MIN. MAX. Unit
High-level output voltage VOH VDD = MIN., IOH = –4 mA 2.4 V
Low-level output voltage VOL VDD = MIN., IOL = 4 mA 0.4 V
High-level input voltage
Note 1
VIH 2.0 VDD + 0.3 V
Low-level input voltage
Note 1
VIL –0.5 +0.8 V
Pulse of less than 10 ns –1.5 +0.8 V
High-level input voltage
Note 2
VIHC 0.8 × VDD VDD + 0.3 V
Low-level input voltage
Note 2
VILC –0.5 0.2 × VDD V
Pulse of less than 10 ns –1.5 0.2 × VDD V
Supply current IDD Normal 150 MHz 2.16 A
operation
180 MHz 2.54 A
200 MHz 2.8 A
Standby 0.25 A
Input leakage current ILI –5 +5
µ
A
Input/output leakage current ILIO –5 +5
µ
A
Notes 1. Not applied to the SysClock pin.
2. Applied to the SysClock pin only.
Remark The operating supply current is almost proportional to the operating clock frequency.