Filter
Top Products
µ
PD30500, 30500A, 30500B
15
Data Sheet U12031EJ3V0DS00
(2)
µ
PD30500A (Preliminary)
Absolute Maximum Ratings
Parameter Symbol Condition Rating Unit
Supply voltage VDDIO –0.5 to +4.0 V
VDD –0.3 to +3.3 V
Input voltage
Note
VI –0.5 to VDDIO + 0.3 V
Pulse of less than 10 ns –1.5 to VDDIO + 0.3 V
Operating case temperature TC 0 to +85 °C
Storage temperature Tstg –40 to +125 °C
Note The upper limit of the input voltage (VDDIO + 0.3) is +4.0 V.
Cautions 1. Do not short circuit two or more outputs at the same time.
2. The quality of the product may be degraded if the absolute maximum rating of even one of
the above parameters is exceeded, even momentarily. Absolute maximum ratings, therefore,
specify the values which if exceeded may physically damage the product. Use the product
never exceeding these ratings.
The specifications and conditions shown in the following DC Characteristics and AC
Characteristics are the range within which the product can normally operate and the quality
can be guaranteed.
DC Characteristics (T
C = 0 to +85 °C, VDDIO = 3.3 V ±5 %, VDD = 2.5 V ±5 %)
Parameter Symbol Condition MIN. MAX. Unit
High-level output voltage VOH VDDIO = MIN., IOH = –4 mA 2.4 V
Low-level output voltage VOL VDDIO = MIN., IOL = 4 mA 0.4 V
High-level input voltage
Note 1
VIH 2.0 VDDIO + 0.3 V
Low-level input voltage
Note 1
VIL –0.5 +0.8 V
Pulse of less than 10 ns –1.5 +0.8 V
High-level input voltage
Note 2
VIHC 0.8 × VDDIO VDDIO + 0.3 V
Low-level input voltage
Note 2
VILC –0.5 0.2 × VDDIO V
Pulse of less than 10 ns –1.5 0.2 × VDDIO V
Input leakage current ILI –5 +5
µ
A
Input/output leakage current ILIO –5 +5
µ
A
Notes 1. Not applied to the SysClock pin.
2. Applied to the SysClock pin only.