Filter
Top Products
Nikon Capture 4 Editor
7 /15
Show Focus Area
To show the focus area used when the image in the active window was taken, select Show Focus
Area from the Image menu.
The focus area is shown by red
focus brackets.
Nikon Capture 4 Editor
Tone Curve Point button
Changes to the Curves Palette
A (“Set Curve Point”) button has been added to the Curves palette. To add a point to a curve corresponding to tones in the
active image, click this button and then click the desired location in the active window.
Show Focus Area
The focus area will not be displayed if the image was created using a COOLPIX-series camera, a non-CPU lens, or manual focus.
Color Mode
Color Mode settings apply only to photographs taken with D2-series, D1-series D100, or D70 cameras. Modes I and Ia, which are adapted to the
sRGB color space, are suited to portraits that will be printed or used “as is” with little or no mod i fi ca tion. Mode II is adapted to the Adobe RGB
color space. This color space is capable of expressing a wider gamut of colors than sRGB, making it the pre ferred choice for pictures that will be
extensively processed or retouched. Modes III and IIIa, which are adapted to the sRGB color space, are suited to nature or land scape shots that
will be printed or used “as is” with little or no modifi cation.
Color Mode (Advanced RAW)