Filter
Top Products
ALIGNMENT OF THE DOORS
12. Ali
g
n the upper door with the lower so that
there is a parallel
g
ap between the doors and
around the frame. Ad
j
ust the doors to the cabi-
net so the
g
askets seal but do not bind.
Ti
g
hten the screws holdin
g
the hin
g
e brackets
in place.
13. Door Seal: The door seal can be checked b
y
closin
g
the door on a 1" x 6" strip of paper. A
sli
g
ht dra
g
should be noticed when the paper is
pulled out from between the
g
asket and the
cabinet. Repeat the process around all four
sides of the door. If the door does not seal
properl
y
, read
j
ust the hin
g
e brackets.
14. Position the travel latches so that the
y
secure
the doors when closed but does not prevent
the doors from closin
g
properl
y
. Ti
g
hten the
two screws in each travel latch.
15. Replace the
j
uice rack and stora
g
e bins into
the door. Make sure that the milk bins
(
wider
stora
g
e bins
)
are installed in the lowest door
position.
Fi
g
ure 18
Fi
g
ure 19
A: Top Hin
g
e B: Bottom Hin
g
e
C: Middle Hin
g
e D: Middle Hin
g
e
13