Filter
Top Products
7
Using Your Product
Before you use the product for the first time, separate
the lid, jar lid food chute and blade from the jar. Wash
in warm, soapy water, or top rack in the dishwasher.
Rinse and dry well.
Assembly (Glass Jar Models)
1. Install the sealing ring over the multi-functional blade.
Blade is sharp. Handle with care.
2. Turn the jar upside down so the small opening is at the top.
3. Turn the multi-functional blade with sealing ring upside
down and place into the bottom of the jar.
4. Position the open end of the threaded jar bottom over
the jar and sealing ring. Turn clockwise to tighten.
Be sure the threaded jar bottom is locked securely to
the jar before using.
5. Slide the jar onto the base.
6. Plug the power cord into a standard household 120/127-
volt, 60 hz. AC outlet. You are now ready to start.
Using the Pre-Programmed Settings
1. Press the ON/OFF power button to turn the product on.
The power light will to blink, meaning the product is
active and ready to use.
2. Choose a recipe from the recipe section of this
manual or use one of your own.
3. Put the ingredients into the jar.
4. Secure the lid and jar lid food chute.
5. Press one of the two Pre-Programmed Setting
buttons appropriate for your recipe.
“Frozen Drinks & Shakes” Button
“Food Chop” Button
6. To change your selection, press Stop followed by
another Pre-Programmed Setting button
(“Frozen Drinks & Shakes” or “Food Chop”)
7. Once the program is finished the product automatically
stops. Please note: You may press the “Stop” button to
cancel the program at any time. The blinking red light
indicates that the blender is ready.
8. Press the ON/OFF power button to turn the product off.
This product is pre-programmed to turn off automatically if not used
for a period of several minutes. All lights will turn off when the unit
automatically powers down.