13
Using your oven
Operation keys:
A Function selection and conrmation
key
B Minus key
C Plus key
Display:
1 Duration/ cooking timer
2 Program end time
3 Kitchen timer
4 Clock
5 Child lock
6 Clock / time display
Manually setting the oven
• Select the operation mode using the function dial (see page 9).
• Set the required temperature using the temperature dial (see page 9. After each use, turn the
dials back to the off position.
Setting the clock
• Press the (a) key until the (4) is selected .
• Press the (B) and (C) key to set the time of day.
• Conrm the setting by pressing the (A) key again; if the (A) key is not pressed, the time will
automatically set after a few seconds.
• This is a 24 hour clock.
Selecting timer functions
• Select the type of function required by pressing the (A) key. The selected function will ash
for ve seconds, the value can be set during this time. Once set, the function will ash
slowly and the time is displayed. N.B. The symbols lit are selected. The most recent setting
will be shown in the display.
• Each press of a key is acknowledged by a beep.
• If one of the value settings keys (B) or (C) is touched and held, the speed of changing the
value will increase.
• In case of a power failure which lasts less than two minutes, all settings are maintained.
To improve the response of the keys, touch them with a larger surface of your
nger.
• When the appliance is connected to the power supply or after a power failure, the word
“META” is rst displayed; then, the display ashes. To enable operation of the oven the time
must be set using (b) and (c) .