Filter
Top Products
Timer Setting
I
This feature allows you to program a
Standing Time after cooking is completed
and to program the oven as a minute timer
and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count 5 minutes
1. F-_ • Press.
2. • Set desired amount of
I_ _ time using number pads.
(up to 99 minutes and
99 seconds).
3.
Start 1
• Press.
},-Time will count
down without oven
operating.
To Set Stand Time:
Example: To stand for 5 rains, after
cooking_(3 rains, at P6-
MEDIUM Power)
• Enter the desired
1. 1 cooking program
(see page 7 for
directions).
I Power Level
(fo Levels)
• Press.
• Set desired amount
of Stand Time using
number pads. (up to
99 minutes and 99
seconds)
• Press.
)-Cooking will start.
After cooking,
stand time will
count down without
oven operating.
5 times
3.
14.
Start 1
To Set Delay Start:
Example" To start cooking 5 minutes
later. (3 mins. at P6-MEDI-
UM Power).
1. _ - Press.
2. • Enter desired amount
of delayed time using
_-_ {_ number pads. (up to
99 minutes and
99 seconds)
m
I Power Level 1( l O Leve/s)
1
I Start 1
• Enter the desired
cooking program
(see page 7 for direc-
tions).
• Press.
)-Delayed time will
count down. Then
cooking will start.
NOTES:
1. If oven door is opened during Stand Time
or Kitchen Timer, the time on the screen
will continue to count down.
2. Delay time cannot be programmed before
any Auto Control Function. This is to pre-
vent the starting temperature of food from
rising before defrosting or cooking begins.
A change in starting temperature could
cause inaccurate results.
13