Filter
Top Products
[
This feature allows you to program a
Standing Time after cooking is completed
and to program the oven as a kitchen timer
and/or to program a delay start.
To Use as a Kitchen Timer:
I
Example: To count 5 minutes
1. _ •Press.
2.
Timer Setting ]
To Set Delay Start:
_Exampie: To start cooking 5 minutes
later. (3 mins. a_[P6-MEDI-
UM Power).
I
• Set desired amount of
time using number pads.
(up to 99 minutes and
99 seconds).
• Press.
>*Time will count
down without oven
operating.
To Set Stand Time:
Example: To stand for 5 mins. after
cooking_(3 mins. at P6-
MEDIUM Power)
1. _ • Enter the desired
cooking program
see page 8 for
4 times d rect ons).
V
2. _ • Press.
3.
• Set desired amount
of Stand Time using
number pads. (up to
99 minutes and 99
seconds)
• Press.
_Cooking will start.
After cooking,
stand time will
count down without
oven operating.
.
V
,
Start
NOTES:
• Press.
• Enter desired amount
of delayed time using
number pads. (up to
99 minutes and
99 seconds)
• Enter the desired
cooking program
(see page 8 for direc-
tions).
•Press.
>-Delayed time will
count down. Then
cooking will start.
1. When each stage finishes, a two beep
signal sounds. At the end of the program,
the oven will beep five times.
2. If oven door is opened during Stand Time
or Kitchen Timer, the time on the Display
Windowwill continue to count down.
3. Stand time and Delay time cannot be
programmed before any Auto Controt
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change in
starting temperature could cause inaccu-
rate results.
14