Filter
Top Products
Control Panel
– 6 –
(1) Display Window
(2) Power Level Pad (pg. 9)
(3) Inverter Turbo Defrost Pad (pg. 10)
(4) Sensor Reheat Pad (pg. 13)
(5) Sensor Cook Pads (pg. 12)
(6) Number Pads
(7) Timer/Clock Pad (pg. 8, 14)
(8) More/Less Pad (pg. 12)
(9) Stop/Reset Pad
Before cooking: One tap clears all your
instructions.
During cooking: One tap temporarily stops
the cooking process. Another tap cancels all
your instructions and colon or time of day
appears in the Display Window.
(10) Start Pad
One tap allows oven to begin functioning. If
door is opened or Stop/Reset Pad is pressed
once during oven operation, Start Pad must
again be pressed to restart oven.
Word Prompters
When pads are pressed, a beep sound is heard and the corresponding letter or word(s) appear and roll across the
Display Window. If a pad is pressed and no beep is heard, the unit does not or cannot accept the instruction. As each
pad is pressed the corresponding word(s) roll across the Display Window. Words will automatically appear to prompt
the user to perform the next step. It is not necessary to wait for the words to appear before pressing pads for the next
step. A two beep sound is heard between stages. At the end of any complete programme, the oven will beep five
times and “ENJOY YOUR MEAL” will appear in the Display Window.
NOTE:
If an operation is set and Start Pad is not pressed, after 6 minutes, the oven will automatically cancel the operation.
The display will revert back to clock or colon mode.
CONTROL PANEL
(1)
(2)
(3)
(5)
(7)
(9)
(4)
(6)
(8)
(10)