Philips HD8743 Coffeemaker User Manual


 
ENGLISH
15
8
Turn the control dial to the “ ” position.
9
Fill in the water tank again and put it back in the machine. Now the
machine is ready for making co ee.
Notes:
When you haven’t used the machine for 2 or more weeks, the machine
will automatically perform an automatic rinse/self-cleaning cycle after you
have switched on the machine. There after you need to initiate the manual
rinse cycle as described above.
The automatic rinse/self-cleaning cycle is also initiated when the machine
has been in stand-by mode, or switched o , for more than 15 minutes.
After this cycle has been completed, you can brew a co ee.
“INTENZA+” water fi lter installation
We recommend you to install the “INTENZA+” water  lter as this prevents
limescale build-up in your machine and preserves a more intense aroma of
your co ee.
The “INTENZA+” water  lter can be purchased separately. For further de-
tails, please refer to the maintenance products page in this manual.
Water is a crucial part of every co ee, so it is very important to always have
it professionally  ltered. Using the “INTENZA+” water  lter will prevent
mineral deposits from building up and improve your water quality.
1
Remove the small white  lter from the water tank and store it in a dry
place.