Filter
Top Products
6
C
3 Lift the basket handle to raise the wire basket to its highest
position,let fat drip into pot and then remove the wire basket
from the fryer.
C
4 Pour out the oil or fat from the back left corner pour spout
on inner pot into a suitable storage container if you plan on
reusing it or to discard. Clean the housing and the inner pot
with a moist cloth with non-abrasive dishwashing liquid and/or
a paper towel to avoid damaging or scratching the non-stick
coating.
5 Clean the lid,condensation collector and the wire basket in
hot soapy water or in the dishwasher.
Do not use any abrasive cleaning agents or materials (e.g scouring
pads) to clean the appliance as to prevent damaging the non-stick
coating interior.
6 Rinse the parts with clean water afterwards and dry
them thoroughly.
C
7 To clean the permanent anti-grease filter thoroughly
as needed:
• Undo the screws on the inside of the lid.
• Remove the filter and clean it in hot soapy water. Let the filter dry
thoroughly before you put it back into the lid and before you start
using the appliance again.
Storing the Appliance
1 Put all parts back onto/into the fryer and close the lid.
C
2 Wind up the cord,push it back into the storage compartment
and put the plug in the plug clip.
3 Lift the fryer by its grips.