Filter
Top Products
L20-246 Rev 0 (12/01)
WARRANTY STATEMENT
Pitco Frialator, Inc. makes the following limited war-
ranties to the original purchaser only for this equip-
ment and replacement parts:
1. WARRANTY PROVISIONS - FRYERS
A. Pitco Frialator, Inc. warrants all parts, with
the exception of the frypot, elements and
computer for 1 year after the date of installa-
tion of the fryer.
B. If any parts become defective during the first
year after the installation date, Pitco Friala-
tor will also pay for the labor, freight and
travel costs involved in replacing said part.
2. WARRANTY PROVISIONS - FRYPOTS
A. If a frypot develops a leak due to a defect in
material or workmanship within the first 10
years after installation, Pitco Frialator, Inc.
will either weld or replace, at its discretion,
the frypot.
B. The customer will be responsible for all
freight, labor and travel charges for this re-
pair.
3. WARRANTY PROVISIONS - COMPUTER
A. Pitco Frialator, Inc. will warrant the Intelli-
fry Computer from defects in material or
workmanship for a period of two years.
B. If the computer is found to be defective dur-
ing the first 2 years after the installation date,
Pitco Frialator Inc. will also pay for the la-
bor, freight and travel costs involved in re-
placing said part.
4. WARRANTY PROVISIONS - ELEMENTS
A. Pitco Frialator, Inc. will warrant the Electric
Elements from defects in material or work-
manship for a period of 3 years.
B. The customer will be responsible for all
freight, labor and travel charges for this re-
pair.
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR
ANY OTHER APPLIANCE.
WARNING:
IMPROPER INSTALLATION, ADJUST-
MENT, ALTERATION, SERVICE OR
MAINTENANCE CAN CAUSE PROPERTY
DAMAGE, INJURY OR DEATH. READ
THE INSTALLATION, OPERATING AND
MAINTENANCE MANUALS THOR-
OUGHLY BEFORE INSTALLING OR SER-
VICING THIS EQUIPMENT.
WARNING:
This machine is intended to be hard wired
when installed in its final location.
WARNING:
If a manufacturer supplied cord is damaged, it
must be replaced by the manufacturer or its
service agent or a similarly qualified person in
order to avoid a hazard.
Retain this manual for future reference.
ENGLISH